Bausch And Lomb Microscopes Manuals

Make Offer - Bausch & Lomb Industrial MicroZoom Microscope with Lenses and Light Source (759) Vintage Antigue Bausch & Lomb Stereo Zoom Binocular Microscope Science Tools $24.99.

Bausch and lomb microscope manual

Bausch and lomb microscope manual
Link: Download Bausch and lomb microscope manual
Information:
Date added: 01.06.2015
Downloads: 193
Rating: 481 out of 1004
Download speed: 25 Mbit/s
Files in category: 347

Bausch and Lomb microscopes were some of the best available. Recognized as the third largest supplier of microscopes worldwide for the majority of the 20th general microscopy we refer you to our. Reference Manual for the BausCh &. Lomb Dynoptic Laboratory Micro- scopes and to “The Theory of the. Microscope finished instruments, Bausch ?L Lomb products are made under the rigid control of INSTRUCTIONS . Image Formation with a Phase Microscope . . . . . . , . Get solutions from top Bausch & Lomb Microscope experts. Bausch & Lomb Microscope Support, Manuals & Customer Service. Do you work here? Claim your Mar 27, 2005 - The Balplan was the flagship microscope made by Bausch & Lomb Inc. in the 1970's and 80's, before the merger of their microscope operations Bausch & Lomb Incorporated. WHAT'S YOUR EYE-CUE? 14. PHYSICAL PROPERTIES OF CELLS. DETERMINED BY MICROSCOPE METHODS 18. Bausch & Lomb produced a series of microscopes known as the DynaZoom and. Dynoptic matching objectives to eyepieces ran to four pages in the manual, it. Find great deals on eBay for Bausch Lomb Microscope in Microscopes. Shop with confidence.Unlike a binocular microscope, which feeds one image to both eyes, a stereo One of the most popular stereo microscopes of all time is the Bausch & Lomb . Manuals for the StereoZoom 4 are on line at www.science-info.net/docs (look in Instructions, manuals, brochures and catalogues. If you buy a used microscope, it probably won't be supplied with an instruction manual, Bausch & Lomb.

2007

Michael A. Covington

Author, Digital SLR Astrophotography

Overview

Unlike a binocular microscope, which feeds one image to both eyes, a stereo microscope gives each eye its own view, so that you see in three dimensions. Stereo microscopes are often used for dissection (hence the alternative term 'dissecting microscope,' not always stereo), inspecting electronic and machine shop work, and handling specimens to prepare slides for more powerful microscopes.

One of the most popular stereo microscopes of all time is the Bausch & Lomb StereoZoom 4 (SZ4), later taken over by Leica and also marketed under the Cambridge Instruments name. It was introduced in 1959 and made until 2000.

The StereoZoom 4 gives an erect image, provides an ample working distance, and incorporates a zoom system in a self-contained optical 'pod' which could be put on many different bases and mounts. StereoZoom 4's are abundant on eBay and in the rest of the secondhand market today.

The most common variety of 'pod' zooms from 0.7× to 3×, although 1–3× and fixed-power versions exist. Fig. 1 shows how it attaches to a stand; two clips swing out and you can simply lift it off.

The eyepieces are normally 10×, non-compensating, with 23.2-mm tubes (the standard size on older microscopes). The eyepieces originally marketed with this microscope are an excellent match to it. Inexpensive non-compensating eyepieces from other vendors also work well.

It is quite possible to improvise a stand if you buy a 'pod' by itself. For low-power examination of hand-held specimens, you don't actually need a focusing mechanism; just support the 'pod' far enough above the table and hold the specimen underneath it.

You can use a desk lamp for illumination, but Bausch & Lomb and Leica made a special Nicholas (collimated-beam) illuminator that could be used separately or inserted into a hole in the back of the 'pod' (Fig. 2). There is also a transillumination base for the StereoZoom 4 that accepts that same illuminator as its light source.

The Nicholas illuminator has one quirk: dust on the innermost lens surface, near the bulb, is projected sharply into the spot of light. Accordingly, a standard maintenance procedure is to open it up and swab the dust out.

Photography

Although it is not trinocular, the StereoZoom 4 is easy to use for photography. Any camera adapter that will fit a standard eyepiece tube is suitable. I prefer to use afocal coupling (that is, camera lens aimed into eyepiece) with a Nikon Coolpix 800 or 990.

Adjustments

Some of the adjustments of the StereoZoom 4 are not widely known. In what follows I'll review all the adjustments that can be done without disassembly.

Fig. 3

Eyepiece focusing

There are adjusting rings around both eyepiece barrels (Fig. 3). The one on the left turns freely and is used to make both eyes focus alike. The one on the right is secured with a set screw and serves to make the focus stay the same while zooming. Here is the procedure for adjusting both of them:

(1) Place a flat specimen, such as a printed page, under the microscope, and zoom to maximum power.

(2) Using only your right eye, focus the microscope. Ignore the image in the left eye.

(3) Loosen the set screw on the right adjusting ring.

(4) Zoom to minimum power and see if the image in your right eye remains in focus. If not, turn the right adjusting ring until it does. Repeat this process several times.

(4) Tighten the set screw. Further adjustment of the ring on the right will not be needed unless you change eyepieces.

(5) Turn the left adjusting ring so that the image in the left eye is also in focus. You can turn the left adjusting ring at any time without disturbing any other adjustment.

As with most binocular microscopes, you can adjust the separation of the eyepieces at any time by just pulling them apart or pushing them together. When doing this, grasp the base of the barrel (painted black, white, or gray), not the adjusting ring.

Fig. 4

Alignment (Eyepiece Centering)

Misalignment of the StereoZoom 4 is surprisingly easy to correct. A stereomicroscope is said to be misaligned when the two eyes are not looking quite in the same direction. If minor, the problem may go unnoticed, or you may simply feel that the microscope is tiring to use, or that no eyepiece separation is quite right.

A StereoZoom 4 that has had its top cover removed will almost certainly be out of alignment unless it was aligned after reassembly.

To test alignment, put a flat specimen, such as a printed page, under the microscope and compare the view in the right and left eyes. (If you use a three-dimensional specimen, the views will certainly be different; that's stereoscopy.)

If your two eyes see the same or almost the same field of view, no adjustment is needed. But if there's a substantial discrepancy, proceed as follows.

First try to describe the problem: 'Image in the right eye needs to move up and to the left' or the like. This is exactly equivalent to saying, 'Image in the left eye needs to move down and to the right.' You can adjust either eyepiece, or both. Naturally, you will choose to adjust the one that is farthest off center.

Next, grasp the base (painted part) of one or both eyepiece barrels and rotate it anticlockwise to unscrew it. You'll see the components shown in Fig. 4.

Loosen the retaining ring slightly. Then direct your attention to the alignment ring, which is held in place by three set screws. Check whether the alignment ring is centered relative to the retaining ring. If you see an obvious error, correct it and be sure to tighten the set screws completely before putting the barrel back on.

In general, you will want to move the alignment ring in the same direction that the image in the eyepiece needs to move. For instance, to move the image to the right, move the alignment ring to the right. (VERIFY)

It may take a few iterations, but you can achieve correct alignment quickly. Complete perfection is not required and in fact is not achievable because, in a true stereo microscope, the two eyes look at the specimen from different vantage points.

Removing the covers

All of this was accomplished without removing the covers on the pod. If you need to do so, proceed as follows.

The screws that hold the bottom cover in place are obvious; hold the pod upside down and you'll see them all around its widest portion. Simply remove them, and the bottom cover comes free. Don't neglect the gasket at the objective end.

With no further disassembly, you can check for dried lubricants on the two rods that control the zoom mechanism. Some cleaning of these rods and a dab of new grease will make zooming much smoother.

To make windows-applications that use the.NET-framework work in wine you have to install the windows-version of mono (= the.NET-framework ) in wine.mono is required to run programs that are written in a.NET-language (such as C#, VB# and others) on linux (only versions 1.1 and 2.0 are currently supported).you have to install the.NET-Framework from the mocrosoft-homepage. But afaik it doesn't really work (i do always get an error-message when doing that).

To remove the top cover, first remove the bottom cover, then the zoom knob (not neglecting its gasket or padded washer). Then unscrew both eyepiece barrels; remove the retaining rings, windows, alignment rings, and gaskets; set the eyepiece separation to the right distance, and the cover will lift off. To reassemble, reverse these steps and then perform an alignment (described above).

Accessory lenses

Auxiliary lenses were made to multiply the power of the StereoZoom 4 by 0.5× or 2×, increasing or reducing the working distance respectively. They screw into the bottom cover, which is threaded 1.5 × 1/32 inch. A cell for an auxiliary lens, with no lens in it, has been marketed as a support for ring illuminators that clamp onto a round body.

Resources

[Updated 2016:] Parts and accessories for the StereoZoom 4 are still marketed by Microscope Central.

Manuals for the StereoZoom 4 are on line at www.science-info.net/docs (look in both the B&L and Leica folders) and http://www.reichertms.com/ref_man.php.

A good review of the history and theory of stereo microscopes is at http://www.microscopyu.com/articles/stereomicroscopy/stereointro.html.

DNS is an application layer protocol. The application layer of the OSI model is the layer closest to the user and provides network services to the applications of the user. Examples of protocols that operate at the application layer are: DNS, FTP, TFTP, SNMP, TELNET, RLOGIN, SMTP, MIME, NFS, FINGER, BOOTP and SMB. Which osi layer provides file transfer services. Transport Layer (Layer 4): Transport layer provides services to application layer and takes services from network layer. The data in the transport layer is referred to as Segments. It is responsible for the End to End delivery of the complete message. The layer of the OSI model provides connectivity and path selection between two end systems where routing occurs in the network layer. The layer of the OSI model provides network services to processes in electronic mail and file transfer programs is application.

Michael A. Covington is the author of Digital SLR Astrophotography and other books. He spends more time with telescopes than microscopes but insists that the two are very similar, except for the size of the specimen.

Note to readers: I've told you all I know; I don't have any further information available about this or any other microscope. Thanks for your interest!